Table of Contents
Advertisement
Installing the appliance
Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e.g.
a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use
a suitable insulating plate or observe the
following minimum distances to a heat
source:
3 cm to electric or gas cookers.
30 cm to an oil or solid fuel cooker.
Changing over the door hinges
The door hinges on this appliance cannot
be changed over.
Appliances with glass front
Caution - risk of appliance tilting over!
When opening the door, ensure that the
appliance does not tilt forwards. The glass
front may shatter if it comes into contact
with the floor.
The appliances must be attached to the
wall with the enclosed brackets.
The installation instructions are enclosed
with the brackets.
Aligning the appliance
The appliance must be level. If the floor is
uneven, use the front height adjustable
feet.
en
5
Advertisement
Table of Contents
