Rescanning Specific Ip Addresses; Configuring A Local Print Agent Installation - PrintFleet TASKalfa 2551ci User Manual

Rescanning
specific IP
addresses
Configuring a
Local Print Agent
installation
spreadsheet format by clicking the XML tab or CSV tab
respectively.
If necessary, you can have Local Agent Management rescan one or
more IP addresses. You might do this if you are waiting for a recent
change to appear (such as a recently installed printer), or to get a
result for an IP address that had timed out from a previous scan.
You could also just click Scan All to scan the entire IP range in the
current scan profile, but with a large IP range you might get other
IP addresses timing out, so sometimes it helps to rescan just the IP
address(es) you are interested in.
To rescan specific IP addresses:
• Do one of the following:
• Under the IP Address column, select the check box beside
each IP address you want to rescan, then beside Perform
with Checked:, click Rescan.
• Right-click in the row of a specific IP address you want to
rescan and choose Rescan from the menu that appears.
If an IP address has Local Print Agent version 4.1.2 (or later)
installed, you can configure that Local Print Agent installation from
Local Agent Management. This allows you to suspend the scanning
of selected local devices connected to the machine at that address.
For example, in some cases a device might print out unwanted
pages each time it is scanned. If this occurs, you could easily
suspend the scanning for that device.
To configure a Local Print Agent installation:
1. Right-click in the row of a specific IP address you want to
configure (and which has version 4.1.2 or later installed), and
choose Configure from the menu that appears. The Printer
DCA - Local Print Agent Configuration dialog opens. Any
PrintFleet Printer DCA
Managing local devices with Local Print Agent
34