2.11 Printer Dca Command Line Options - PrintFleet TASKalfa 2551ci User Manual

2.11 Printer DCA Command Line Options

If you want, you can use a command line option to import IP ranges
to your Printer DCA scan list. This is the essentially the same as
clicking the Import button on the General tab of the Scan tab in
the Printer DCA application interface. If your IP ranges change
frequently you could set up your system to run this command on a
regular basis (say once a day during off hours), thereby ensuring
that the IP range information is always current.
Note This feature clears the existing list prior to import.
To import IP ranges from a command line:
• Use the command PrinterDCA.Service.exe with the following
options:
• /task: Currently the only supported task is 'ipimport'. This is
case insensitive.
• /file: Absolute path to file with IP list to import
• /profile: This is optional; if not included, 'Default' will be
used.
• /killgui: Must be "true", or default of "false" is assumed.
Example:
PrinterDCA.Service.exe /task=ipimport /
file=c:\test.txt /profile=test
The command will return one of the following error codes (and an
appropriate message):
• -1: General failure.
• 0: Successfully imported.
• 1: Malformed input file - not imported.
• 2: Could not find or access file.
• 3: GUI open, could not exclusively lock .pfc config file.
PrintFleet Printer DCA
Using the Printer Data Collection Agent
28