Replacing The Processor - Dell Inspiron One 2020 Owner's Manual

Replacing the Processor

Procedure
1 Unpack the new processor, being careful not to touch the underside of
the processor.
CAUTION: Ground yourself by touching an unpainted metal surface.
2 If the release lever on the socket is not fully extended, move it to that position.
CAUTION: You must position the processor correctly in the processor socket to
avoid permanent damage to the processor.
3
Orient the alignment notches on the processor with the alignment tabs on
the socket.
4 Align the pin-1 corners of the processor and socket.
CAUTION: Ensure that the processor cover notch is positioned underneath the
alignment post.
5 When the processor is fully seated in the socket, close the processor cover.
6 Pivot the release lever down and place it under the tab on the processor cover.
1
1 processor pin-1 indicator
3 alignment notches (2)
5 alignment post
7 release lever
4
3
2
5
2 processor
4 processor cover notch
6 processor cover
6
7
Processor |
67