Table of Contents
Advertisement
Safety
3
Safety
This chapter details how the notes for the installation
instructions, as well as the general safety instuctions,
necessary for safe and truoble-free operation, are
arranged in this manual.
Safety and user notes, which specifically refer to the
installation, in the installation manual immerdiately
following the individual installation steps, are found here.
Carefully read the safety instructions before
commencing the installation.
Severe injury and even death, as well as material losses
and environmental damage, may follow if you ignore
safety instuctions.
3.1
Correct use
This installation set holds the thermal solar collectors,
which are installed on sloping roofs with a slope of 25°
to 60°. The collectors can be installed on corrugated and
sheet steel roofs with slopes of between 5° and 65°.
Operating conditions
Only erect the installation set on roofs whose
construction can support the weight. If necessary,
consult a structural engineer or a roofer.
The installation set is suitable for a max. standard snow
load of 2.0 kN/m² and an installation height of max, 20m.
Using appropriate accessories, the installation set can
be used for a max. standard snow load of 3.1 kN/m² and
a max. installation height of 100 m. See Chapter 5.8
"Installing profile rails".
The roof installation set must not be used for fixing any
other objects to the roof. The kit is intended exclusively
for the safe fixing of solar collectors.
6
6 720 613 577 (2006/04)
Advertisement
Table of Contents
