Table of Contents
Advertisement
Fitting the connection set for two rows (accessory)
9
Fitting the connection set for two rows (accessory)
The connection set (Fig. 58, Item 8) is available as an
accessory, and connects two rows of collectors.
i
USER NOTE
Fit all connection parts to the collectors on
the ground.
Scope of supply (Fig. 58)
Item 1:
Angled nozzle
Item 2:
Hose clip
Item 3:
Dummy plug
Item 4:
Solar hose 55 mm
Item 5:
Solar hose 1000 mm
Item 6:
Union nut G1
Item 7:
Clamping disc
Fitting additional dummy plugs
Use the dummy plugs to close up any collector connec-
tions not in use (Fig. 59, Item 1).
B Place 55 mm solar hoses (Fig. 59, Item 3) together
with the preassembled dummy plugs onto the two
free connections.
B Once the hose clips are sitting correctly, pull the lock-
ing rings to secure the connection.
Installing the connection set
B Remove plastic caps (transport protection) from the
relevant collector connections.
B Push union nut (Fig. 60, Item 1) over the collector
connections.
B Place the clamping disc (Fig. 60, Item 2) behind the
bead on the collector connection and press together.
B Press angled nozzle with O-ring (Fig. 60, Item 3)
onto connection, align and bolt together with union
nut.
B Measure distance between the angled nozzles
(dim. X) once the collectors are installed, and cut the
solar hose (Fig. 60, Item 5) to size accordingly.
B Attach solar hose to the angled nozzles and secure
using hose clips (Fig. 60, Item 4).
38
6
7
×
2
×
2
×
2
×
2
×
1
×
2
×
2
Fig. 58 Schematic diagram and scope of supply
1
Fig. 59 Fitting the preassembled dummy plugs
Fig. 60 Connection set between two collector rows
9
1
2
5
4
3
1
2
1
6 720 613 577 (2006/04)
9
8
63043965.51-1.SD
63043965.51-1.SD
3
4
63043965.52-1.SD
63043965.52-1.SD
2
3
4
5
63043965.53-1.SD
63043965.53-1.SD
Advertisement
Table of Contents
