Daewoo DHC-X150E Instruction Manual page 20

Customizing the Function Settings
Once the initial settings have been completed, the player can always be operated under the same conditions whenever the
power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The
SETUP menu includes the information for AUDIO and other system controls.
SETUP MENU SUB MENU
NORMAL/PS
TV DISPLAY
NORMAL/LB
TV TYPE
ENGLISH
GENERAL SETUP
GERMAN
(SET UP)
FRENCH
OSD LANG
DUTCH
ITALIAN
SPANISH
DYNAMIC
36
ITEM and DESCRIPTIONS
Set up TV aspect according to your TV set. If WIDE screen
is supported on your TV, select WIDE.
If your TV supports only 4:3, you may select both NORMAL/
PS (Pan & Scan) and NORMAL/LB (Letter Box).
When using a wide screen TV (16:9 aspect ratio)
Select WIDE in the TV ASPECT value.
Discs may be recorded in more than one screen format.
Following the chart below, make screen aspect adjustments
in your wide screen TV according to the aspect ratio on the
WIDE
disc you are viewing.
When using a standard TV (4:3 aspect ratio)
Select NORMAL/LB (Letter Box) or NORMAL/PS (Pan &
Scan) in the TV ASPECT value.
Following the chart below, make screen aspect adjustments
according to the aspect ratio on the disc you are viewing.
Set up TV type according to type supported by your TV or
MULTI
monitor. When you select MULTI, the output video type is
NTSC
dependent on the disc loaded. If the recorded video type is
PAL
PAL then it outputs PAL. If NTSC then NTSC.
This item is to select the language for On-Screen Display
messages that will be displayed on the TV screen. When
your desired language is selected, all OSD messages are
displayed in the selected language.
Note :
Selecting languages in the SE UP can be changed
/ added/ deleted in accordance with region.
DYNAMIC(Valid for Dolby Digital DVD disc)
A consistent problem in the delivery of audio programming is
that different members of the audience desire or even need
different amounts of dynamic range depending on the
listening situation.
FULL Original high quality programs, such as feature films, are
. typically mixed with a wide dynamic range. Using dialogue
. as a reference, loud sounds like explosions are ofen 20 dB
. louder, and faint sounds like leaves rusting may be 50 dB
. quieter. In many listening situations, it is objectionable to
. allow the sound to become very loud, and the loudest
sounds must be compressed downwards in level. Likewise
OFF
the very quiet sounds would be inaudiible and must be
brought upwards in level to be heard. If your want to jear the
original dynamic range recorded on disc set the DYNAMIC to
of OFF. Otherwise set to FULL then the dynamic range is
reduced by bringing down the level of the loud sounds and
bringing up the level of the quiet sounds.
Customizing the Function Settings
SETUP MENU SUB MENU
S-VIDEO
Y, Pb, Rr
VIDEO OUT
R. G. B
ENGLISH
GERMAN
AUDIO
FRENCH
SUBTITLE
DUTCH
DISC MENU
ITALIAN
SPANISH
GENERAL SETUP
(SET UP)
DEFAULT RESET
1 G
2
3 PG
4 PG13
PARENTAL
5
(DVD only)
6 PG-R
7 NC-7
8 ADULT
9 NO-
PARENTAL
PASSWORD
CHANGE
(DVD only)
LARGE
FRONT
SMALL
CENTER
SMALL
REAR
SPEAKER
SMALL
SUBWOOFER
ON
OFF
DIGITAL OUT
ON
5FT/1.5M
FRONT POSN
DELAY TIME
.
.
CENTER POSN
.
.
REAR POSN
30FT/9.2M
ITEM and DESCRIPTIONS
Select the video output signal formats from the machine.
Because VIDEO OUTPUT is useful only for selected signal format,
select the appropriate item matching with TV input function.
Note : The machine has component jack instead of scart jack in
accordance with region. Though you select RGB, the
machine having component jack is not useful for RGB
video signal format.
AUDIO : Select a preferred language for the sound track.
SUBTITLE : Select a preferred language for subtitles.
DISC MENU : Select a preferred language for menus.
Note : Selecting languages in the SE UP can be changed
/ added/ deleted in accordance with region.
Change the your settings to defaults.
This function is to disable the playing of specified DVD that are
unsuitable for children. As each disc has slightly different codes,
please refer to the disc instruction. There are 8 levels. If the level
is 8, the contents of the disc are suitable for adult. If the level is 1,
the contents of the disc are suitable for child. If you didn't set a
new password and level, there is no restriction playing discs.
When you turn on this unit for the first time, setting the new
password is recommended
Set/Change the password for the parental lock.
If it is the first time changing password, input "0000" on old
PASSWORD.
Set up the speaker configuration according to your speakers.
If satellite speakers connected to the machine, select SMALL for
small configuration.
Control the output condition of digital coaxial out.
Note : When "ON" is selected, DELAY TIME of each speaker can
not be accessed.
In Dolby Digital or Dolby Pro Logic mode it is assumed that the
time it takes the sound from each speaker to reach the listener, is
the same. But if the time interval from the center or rear left and
right speakers to the listener is closer than the time interval from
the listener to the front left and right speaker, the sound of center
or rear left and right speaker will reach the listener first; instead of
the sound of the front speakers. (It is desirable that the sound from
the front speakers reach the listener first.)
Dolby Digital and Dolby Pro Logic modes provide speaker time
delay adjustments to resolve this problem:; you can manually set
delay time of the center or rear left and right speakers so that the
sound from all speakers will arrive simultaneously to the listener.
37