Table of Contents
Advertisement
Memory Sending________________________________
You can use Memory Sending to send your document. With Memory Sending, the
FAXPHONE quickly scans the document into memory. Then, after it dials the receiv-
ing party, it sends the document from memory. This means you do not have to wait for
the FAXPHONE to finish sending before you can retrieve your original document.
You can send up to 21 letter-size pages (based on the CCITT #1 Chart—standard
resolution) at one time with Memory Sending.
If the memory becomes full while scanning your document, MEMORY FULL is
displayed on the LCD. If this should happen, you may need to open the operation
panel to remove the document. See Clearing document jams, p. 58. Then try divid-
ing the document into several sections and sending each section individually, or
send using Direct Sending or Manual Sending. See p. 53.
The definition of a letter-size page for memory storage purposes is based on the CCITT
#1 Chart.
1
Feed the document face-down into the
Automatic Document Feeder (ADF).
See Loading the document, p. 45.
You can set the resolution and density. See p. 47.
2
Press [FUNCTION].
Wait a second for TEL REGISTRATION to appear.
3
Press [SEND OPTIONS].
Press [START/COPY].
4
Dial the other party's fax number.
Use one of the dialing methods described earlier in
this chapter (see p. 52).
5
Press [START/COPY].
The FAXPHONE scans the document into memory
and begins sending.
Sending documents
STANDARD
SELECT MENU
TEL REGISTRATION
MEMORY TX
TEL =
TEL=
9876543333
TX/RX NO.
XXXX
MEMORY INPUT P01
5
55
Advertisement
Table of Contents
