Using The Optical Disc Drive - Toshiba A300D User Manual

Using the optical disc drive

The full-size drive provides high-performance execution of CD/DVD-based
programs. You can run either 12 cm (4.72") or 8 cm (3.15") CDs without an
adaptor. An ATAPI interface controller is used for CD/DVD operation. When
the computer is accessing a CD/DVD, an indicator on the drive glows.
Refer also to the
for precautions on writing to CD/DVD.
Loading discs
To load a disc, follow the steps below.
1. a. When the power is on, press the eject button to open the drawer
b. Pressing the eject button will not open the drawer when the disc
User's Manual
Writing CD/DVD with the DVD Super Multi drive
slightly.
drive's power is off. If the power is off, you can open the drawer by
inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Eject Button
Pressing the eject button
Operating Basics
section
4-16