Usb Mouse - Toshiba A300D User Manual

Problem
The response of the
TouchPad is too
sensitive

USB mouse

Problem
On-screen pointer does
not respond to mouse
operation
Double-clicking does
not work
The mouse pointer
moves too fast or too
slow
User's Manual
Procedure
Adjust the touch sensitivity.
1. Click , Control Panel, Hardware and
Sound, then Mouse icon.
2. Wihtin the Mouse Properties window, click the
Device Settings tab.
3. Click the Settings button.
4. The Properties for Synaptics Touchpad on
PS/2 port screen appears. Double-click
Sensitivity in the Select an item section on
the left side of the screen.
5. PalmCheck and Touch Sensitivity are
displayed. Click Touch Sensitivity.
6. Move the slide bar for Touch Sensitivity to
make an adjustment. Click the OK button.
7. Click the OK button on the Device Setting tab.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in the
mouse control utility.
1. To access this utility, click
Hardware and Sound, then Mouse icon.
2. Wihtin the Mouse Properties window, click the
Buttons tab.
3. Set the double-click speed as required and
click OK.
Try changing the speed setting in the mouse
control utility.
1. To access this utility, click
Hardware and Sound, then Mouse icon.
2. Within the Mouse Properties window, click the
Pointer Options tab.
3. Set the pointer speed as required and click
OK.
Troubleshooting
, Control Panel,
, Control Panel,
9-10