Pointing Device; Touch Pad - Toshiba T210 User Manual

T210/T230
Problem
You cannot write to a
Memory Card
You cannot read a file

Pointing device

If you are using a USB mouse, you should also refer to both the
device
mouse.

Touch Pad

Problem
The Touch Pad does
not work.
On-screen pointer
does not respond to
pointing device
operation
Double-tapping does
not work
The on-screen pointer
moves too fast or too
slow
8-10
Procedure
Remove the Memory Card from the computer
and check to ensure that it is not write protected.
Check to ensure the required file is actually on
the Memory Card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enable.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start -> Control Panel
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window,
3. Set the pointer speed as required and
-> Hardware and Sound -> Mouse.
the Buttons tab.
click OK.
Panel -> Hardware and Sound -> Mouse.
click the Pointer Options tab.
click OK.
USB
User's Manual