Power-Up Modes - Toshiba T210 User Manual

Starting the computer by password
To start up the computer with the user password, follow these steps:
1. Turn on the power as described in Chapter 1,
The following message will appear in the screen:
At this point, the hotkeys FN + F1 to F12 do not work. They will function
after you enter the password.
2. Enter the Password.
3. Press ENTER.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.

Power-up modes

The computer has three different power-up modes as follows:
Shut Down Mode : The computer will shut down without saving data -
in view of this you must always save your work before you turn the
computer off.
Hibernation Mode : Data in memory will be saved to the hard disk drive.
Sleep Mode : Data will be maintained in the computer's memory.
Please refer to the sections
power
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, Start -> Control
Panel -> System and Security -> Power Options).
Hot keys
You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter
Hibernation Mode - please refer to Chapter 5,
details.
User's Manual
Enter Password [ ]
in Chapter 1, Getting
Turning on the power
Started, for further information.
The
T210/T230
Getting Started.
and Turning off the
Keyboard, for further
6-13