Heat Sink - HP Pavilion 14 Maintenance And Service Manual

4. Remove the fan (3).
Reverse this procedure to install the fan.

Heat sink

NOTE:
The heat sink spare part kit includes replacement thermal material. Replacement thermal
material is also available in the Thermal Material Kit, spare part number 719864-001.
Description
Heat sink (includes replacement thermal material)
Heat sink (includes replacement thermal material)
Before removing the heat sink, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a.
Optical drive (see
b.
Hard drive (see
c.
WLAN module (see
d.
Keyboard (see
Battery on page 37), and then remove the following components:
Optical drive on page
Hard drive on page 40)
WLAN module on page
Keyboard on page 46)
38)
42)
Component replacement procedures
Spare part number
719861-001
719862-001
63