Altimeter - Garmin G3X Pilot's Manual

1
2
3
4
Attitude Indicator W/AFCS and SVX

ALTIMETER

The Altimeter displays 400 feet of barometric altitude values at a time on a rolling
number gauge using a moving tape. Numeric labels and major tick marks are shown
at intervals of 100 feet. Minor tick marks are at intervals of 20 feet. The current
altitude is displayed in the black pointer.
The Selected Altitude is displayed above the Altimeter in the box indicated by a
selection bug symbol. A bug corresponding to this altitude is shown on the tape; if
the Selected Altitude exceeds the range shown on the tape, the bug appears at the
corresponding edge of the tape.
Setting the selected altitude:
1) From the PFD Page (one display) or PFD (two display), press the ALT (or
ALT/PTCH if the Integrated Autopilot Interface is configured) Softkey.
2) Turn the FMS Joystick to set the Selected Altitude in 100-ft increments.
Syncing to the current altitude:
1) From the PFD Page (one display) or PFD (two display), press the ALT (or
ALT/PTCH if the Integrated Autopilot Interface is configured) Softkey.
2) Press and hold the FMS Joystick. The current altitude is now displayed as
the Selected Altitude.
190-01115-00 Rev. K
9
Garmin G3X Pilot's Guide
Flight Instruments
1
Roll Pointer
8
2
Roll Scale
3
Horizon Line
7
4
Aircraft Symbol
5
Slip/Skid Indicator
10
6
Land Representation
7
Pitch Scale
6
8
Sky Representation
9
Roll Scale Zero
5
10 Flight Director
Command Bars
75