Sound - Garmin G3X Pilot's Manual

System Overview

SOUND

The pilot can manually adjust the desired XM Volume (0-10), Message Volume (Off or
1-10), Altitude Alert (On/Off), and Minimums Alert (On/Off). Message Volume controls
the banner message tones (e.g., "Approaching Airspace" or "Arriving at Waypoint").
Alert Volume (e.g., terrain, traffic, autopilot, etc.) is set in configuration mode (refer to
the G3X Installation Manual for more information).
Adjusting XM and/or Message Volume:
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
3) Turn or move the FMS Joystick to highlight 'Sound', and press the ENT Key.
4) Move the FMS Joystick to highlight the desired field (XM Volume or
Message Volume), and select the desired volume by turning the FMS
Joystick.
5) Press the FMS Joystick, the CLR Key, the EXIT Softkey or the MENU Key to
return to the previous page.
Turning the altitude alert tone on/off:
NOTE: Refer to the Flight Instruments section for more information regarding
the Altitude Alert Tone.
1) Press the MENU Key twice to display the Main Menu.
2) Turn or move the FMS Joystick to highlight 'System Setup...' and press the
ENT Key.
62
Sound Setup Page (Split-Screen)
Garmin G3X Pilot's Guide 190-01115-00 Rev. K