Installation - MULTIQUIP GAC-6HZR Operation And Parts Manual

CONNeCTiNg THe gROuNd
The nut and ground terminal on the generator should always
be used to connect the generator to a suitable ground. The
ground cable should be #8 size wire minimum.
At the generator, connect the terminal of the ground cable
between the lock washer and the nut (Figure 2) and tighten
the nut fully. Connect the other end of the ground cable to
a suitable earth ground (ground rod).
GENERATOR
GROUND LUG
page 14 — gaC6HZR 60 HZ geNeRaTOR• OpeRaTiON aNd paRTs maNual — Rev. #1 (03/31/10)
6000
GAC-6HZR
POWERED by
Honda Engines
211052
AC CIRCUIT
BREAKER
(for main)
V 120
INTERRUPTEUR DE
GFCI CIRCUIT
COURANT PRINCIPAL
BREAKER
INTERRUPTEUR DE
COURANT
AC VOLTMETER
VOLTOMETRE CA
MARCHE ON MARCHE ON
ARRET OFF ARRET OFF
IDLE OPERATION
CONTROL SWITCH
CONTROL INTERRUPTEUR
240V
DE RALENTI DE OPERATION
120V
#8 MINIMUM
REFERENCE
NEC 250-52(C)
Figure 2. Generator Grounding
GROUND
CABLE
8 FT. MINIMUM

installatiOn

GROUND ROD
FOR EARTH
GROUND
CONNECT TO
BUILDING
GROUND
IF REQUIRED