Scsi Bus Conditions And Miscellaneous Features Supported - Seagate HAWK ST32430N Product Manual

Product Manual - Hawk 2LP Family SCSI-2 (Volume 1), Rev. F
_____________________________________________________________________________________
11.4

SCSI bus conditions and miscellaneous features supported

Asynchronous SCSI bus conditions supported by the drive are listed in Table 11.4-1. These conditions cause
the SCSI device to perform certain actions and can alter the phase sequence. Other miscellaneous operating
features supported are also listed here.
Condition/Feature Supported by:
SCSI-1 SCSI-2/SCSI-3
Y
Y
Y
N
Y
Y
Y
Y
N
Y
Y
N
Y
Y
Y
Y
N
N
[1]
Y
Y
N
Y
SCSI-1 SCSI-2/SCSI-3
Y
Y
N
Y
[1]
N
Y
Y
Notes.
[1] Option supported only if customer requests.
Table 11.4-1. SCSI bus conditions and other misc. features
Conditions or Feature
Y Attention Condition
Y Reset Condition
Y Contingent Allegiance Condition
N Asynchronous Event Notification
Y Arbitrating System
Y Disconnect/Reconnect
Y Asynchronous Data Transfer
Y Synchronous Data Transfer
N Synchronized (locked) Spindle Operation
Y Differential Interface Circuits available
Y Segmented Caching
N Zero Latency Read
Y Queue tagging (up to 64 Que tags supported)
Y Deferred Error Handling
Y Parameter Rounding
Y Reporting actual retry count in Extended Sense bytes
N Adaptive Caching (available only on some drives)
N SMP = 1 in Mode Select command needed to save
[1] Flag and Link bits in Control Byte supported
Y Immediate status on Start/Stop command
Y Immediate status on Format unit command
N Immediate status on Synchronize Cache command
Y Format progress indication
Status Supported
Y Good
Y Check Condition
N Condition Met/Good
Y Busy
[1] Intermediate/Good
N Intermediate/Condition Met/Good
Y Reservation Conflict
Y Queue Full
15, 16 and 17.
RPL and Rotational Offset bytes (in Table 5.2.1-25
of Vol. II).
41