Scanning From The Network Interface Unit (For Windows) - Epson DS-510 User Manual

DS-510 User's Guide
E
Make necessary settings on Main Settings, and then click Scan.
Scanning from the Network Interface Unit (for
Windows)
Setup a Job in advance.
"Assigning a Specified Scanning Setting to a Program" on page 30
&
A
Turn on your scanner, Network Interface Unit and the client computer.
B
Load the document(s).
C
Press the OK button on the Network Interface Unit.
The scanner searches for an available computer.
D
Select the computer you want to send the data to, and then press the OK button.
If a group is set for the scanner, you need to set the same group on the computer if you want to display it on the
panel.
E
Enter the password.
If the password entry screen is not displayed, go to the next step.
See the Help for details on Document Capture Pro.
F
Select a job, and then press the OK button.
G
Check the settings, and then press the ] button on the scanner.
Using the Network Interface Unit
38