Scanning Over A Network - Epson DS-510 User Manual

DS-510 User's Guide
D
Select Network, then click Add.
E
In the Add window, choose the Network Interface Unit's IP address under Search for addresses, or select Enter
address and type in the address. Then click OK.
F
In the Epson Scan Settings window, click Test to check the connection. If everything works properly, a message
indicating successful connection is displayed.
G
Click OK to save the settings.

Scanning Over a Network

Note:
You must set the IP address for your Network Interface Unit before using it.
"Setting Up Client Computers with Epson Scan Settings" on page 36
&
A
Turn on your scanner, Network Interface Unit and the client computer.
Turn on your scanner and the client computer.
B
Load the document(s).
C
Start Document Capture Pro/Document Capture.
"Document Capture Pro (Windows)/Document Capture (Mac OS X)" on page 39
&
D
Click (Scan) icon on the Document Capture Pro/Document Capture Main window.
Using the Network Interface Unit
37