Client PC
Description
Client PC IP address Enter a starting IP address in the left field and
Service Name
Protocol
Port Range
Add
Clear
IP filtering entries will be listed in the IP filtering table as shown below.
Delete Selected/
Delete All
Enter a description for reference/identification
of up to 16 alphanumeric characters.
the end IP address in the right field to define a
range of IP addresses; or enter an IP address in
the left field only to define a single IP address.
Various services are listed here with a short
description. Check/uncheck the box for each
service you wish to select.
Select protocol "TCP" or "UDP" or "Both" for a
service not included in the "Client PC Service"
list.
Enter the port range for the service not
included in the "Client PC Service" list.
Enter a single port number e.g. 110, a range of
port numbers e.g. 110‐120, or multiple port
numbers separated by a comma e.g.
110,115,120.
Click "Add" to add selected services or a user
defined service to the IP filtering table.
Clear all fields.
Delete selected or all entries from the table.
62