Hunter Type 2 Models Owner's Manual And Installation Manual page 14

7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-7. First install A15 E12 bulbs (40 Watt
Maximum) into the sockets.
7-8. Attach the extra pull chains (included)
to the fan pull chain and light pull chain
using the breakaway connector. (You
may find the breakaway connector on
the end of the extra chain.)
7-9. Thread the pull chains through the
holes in the metal disc. Then, thread
the pull chains through the hole in the
center of the glass bowl.
7-10. Thread the pull chains through the
grommet holes on the sides of the cover
plate.
7-11. Place the cover plate up against the
glass bowl. Align the holes in the cover
plate and glass bowl.
7-12. Screw the finial onto the threaded rod
end until tight.
Note: In compliance with US federal
energy regulations, this ceiling fan
contains a device that restricts
its light output. Exceeding the
wattage limit marked on the MAX
wattage sticker affixed to the light
socket(s) may result in fire hazard
or improper operation. If lights
do not appear to be operating
properly, see the troubleshooting
section.
Metal Disc
Threaded
Rod
Cover Plate
Grommet Hole
Finial
14
45076-01 • 11/18/10 • Hunter Fan Company
Light Bulbs
(A15 E12
40 Watt
Maximum)
Glass Bowl