1. Manuals
  2. Brands
  3. Hunter Manuals
  4. Fan
  5. Type 2 Models
  6. Owner's manual and installation manual

Hunter Type 2 Models Owner's Manual And Installation Manual

Hide thumbs Also See for Type 2 Models:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Owners & Installation Manual
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45076-01
20101118
©2010 Hunter Fan Co.
Type 2 Models
Type 2 Models
Type 2 Models
Owner's Guide and Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for Hunter Type 2 Models

Summary of Contents for Hunter Type 2 Models

  • Page 1 Type 2 Models Type 2 Models Type 2 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.

  • Page 2: Table Of Contents

    • To reduce the risk of fire, electrical shock, or motor damage, do not Bowl Light Fixture ....12 use a solid-state speed control with this fan. Use only Hunter speed 8 • Operating and Cleaning Your controls.

  • Page 3: Preparing The Fan Site

    If you want to use an existing fan site, complete the following checklist to System determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page.
  • Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 45076-01 • 11/18/10 • Hunter Fan Company...
  • Page 5 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.

  • Page 6: Getting Ready

    • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •...

  • Page 7: Installing The Hanger Bracket

    Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45076-01 • 11/18/10 • Hunter Fan Company...

  • Page 8: Assembling And Hanging The Fan

    (Rotate the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Indent Steps 3-4 – 3-5 45076-01 • 11/18/10 • Hunter Fan Company...

  • Page 9: Wiring The Fan

    4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45076-01 • 11/18/10 • Hunter Fan Company...

  • Page 10: Installing The Canopy And Canopy

    5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45076-01 • 11/18/10 • Hunter Fan Company...

  • Page 11: Assembling The Blades

    Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Step 6-2 (Detail) Armor on the blades. 45076-01 • 11/18/10 • Hunter Fan Company...

  • Page 12: Completing Your Installation With A Bowl Light Fixture

    7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.
  • Page 13 7-6. Place the lower switch housing assembly into the upper switch housing. Align the screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Upper Switch Housing Lower Housing Switch Assembly Housing Screw Steps 7-5 – 7-6 45076-01 • 11/18/10 • Hunter Fan Company...
  • Page 14 MAX wattage sticker affixed to the light socket(s) may result in fire hazard Finial or improper operation. If lights do not appear to be operating properly, see the troubleshooting section. 45076-01 • 11/18/10 • Hunter Fan Company...
  • Page 15 7 • Completing Your Installation With a Bowl Light Fixture (Continued) 7-13. Install A15 E12 40 Watt bulbs into the sockets. Light Bulbs (A15 E12 Base 40 Watt Maximum) 45076-01 • 11/18/10 • Hunter Fan Company...

  • Page 16: Operating And Cleaning Your

    8-6. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to To Change Airflow Direction attract dust and dirt.

  • Page 17: Troubleshooting

    If you need parts or service assistance, please call 888-830-1326 (In Canada, call 1-866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 45076-01 • 11/18/10 • Hunter Fan Company...

Table of Contents