Hunter 23298 Owner's Manual And Installation Manual
Type 3 models
Hide thumbs
Also See for 23298:
- Parts manual (4 pages) ,
- Installation manual (1 page) ,
- Installating and operation manual (16 pages)
Table of Contents
Advertisement
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 41874-01
20090813
©2009 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter 23298
Summary of Contents for Hunter 23298
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 41874-01 20090813 ©2009 Hunter Fan Co.
-
Page 2: Table Of Contents
9 • Operating and Cleaning Your Ceiling use a solid-state speed control with this fan. Use only Hunter speed Fan ....... 14 controls. - Page 3 Understanding Mounting Hunter’s patented mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on your preference: Standard or Angle mounting. The steps in this manual include instructions for both mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Steps 2-3 – 2-5 Flat Washer 3” Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing towards the ceiling peak. 41874-01 • 08/13/09 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
3-5. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim of the canopy. Downrod WARNING: Fan may fall if not assembled as directed in these installation instructions. Set Screw Canopy Canopy Trim Ring Step 3-5 U-shaped Hole 41874-01 • 08/13/09 • Hunter Fan Company... -
Page 7: Wiring The Fan
• The black power wire from the ceiling to the black wire from the fan Wire Connector 4-4. Push all wires and wire connectors back through the ceiling plate hole into the outlet box. 41874-01 • 08/13/09 • Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy Trim
2. Press firmly on opposite sides of the ring towards the canopy. The tabs will flex out releasing the trim ring from the canopy Step 5-3 Steps 5-4 – 5-5 Canopy Screw 41874-01 • 08/13/09 • Hunter Fan Company... -
Page 9: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons Step 6-1 (Detail) (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. -
Page 10: Installing The Light Kit
190 Watts. Exceeding that Plug Connector limit or the marked limit on this product may result Detail in fire hazard or improper operation. Housing Assembly Screw 41874-01 • 08/13/09 • Hunter Fan Company... - Page 11 7-8. To install the glass shade, loosen the thumbscrew and slide the moveable cradle out. Thumbscrew Cradle 7-9. Seat the shade in the three cradles. Push the moveable cradle back in and tighten the thumbscrew. Shade Step 7-8 Step 7-9 Step 7-9 (Detail) 41874-01 • 08/13/09 • Hunter Fan Company...
-
Page 12: Assembling The Remote Control And Mounting The Cradle
CAUTION: The remote control device complies with part 15 of the Tabs FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. - Page 13 The setting will not change in the event of power failure or if the power to the fan is inadvertently shut off. Dip Switches Dip Switches Set to 01110 Set to 01001 41874-01 • 08/13/09 • Hunter Fan Company...
-
Page 14: Operating And Cleaning Your Ceiling
To Change Airflow Direction Press the reversing switch on the remote while the fan is running. In warm weather, use downward air flow pattern 41874-01 • 08/13/09 • Hunter Fan Company... - Page 15 Occasionally, apply a light coat of furniture polish for added protection and beauty. Clean painted and high-gloss blades in the same manner as the fan finish. In cold weather, use upward air flow pattern 41874-01 • 08/13/09 • Hunter Fan Company...
-
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 1-866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 41874-01 • 08/13/09 • Hunter Fan Company...