Windshield Wipers; Daytime Running Lights - Subaru Outback Quick Reference Manual

OFF
1
INT.
LOW
HIGH

Windshield Wipers

To turn on the wipers, press the wiper control lever down
one level for intermittent, two levels for low, or three levels
for high speed. Return the lever to the "OFF" position to
stop the wipers. For a single wipe move the lever up. To
spray washer fluid, pull and hold the lever toward you.
To operate the rear wiper, rotate the end of the knob
upward to the intermittent, continuous, or wash position.
When the rear wiper is off, rotate the knob downward to
wash and wipe the rear window.

Daytime Running Lights

Daytime running lights are standard on your vehicle. Only a
reduced brightness high beam will be automatically turned
on when the engine has started and the parking brake is fully
released or the light switch is in the "OFF" or "
" position.
The brightness of the illumination of the high beam headlights
is reduced by the daytime running light system. You must
always switch on your headlights when it's dark outside by
turning the light switch to the position.
11
776810_11a_Subaru_Outback_QRG_051210.indd 11 5/17/10 10:59 AM