HP ProLiant DL360p Specification page 6

QuickSpecs
Standard Features
Expansion Slots
HP Server ROM
Storage Controller
One of the following
depending on Model
Expansion Slots Technology
#
1 PCIe 3.0
2 PCIe 3.0
*Indicates the number of physical electrical lanes running to the connector.
NOTE: Two PCIe 3.0 expansion slots: (1) Half-length, full-height slot and (1) low-profile slot.
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
www.hp.com/support/rbsu.
Entry Models
Base Models
Performance Models
Energy Star Models
One of the following
depending on Model
DA - 14211 Worldwide — Version 47 — December 13, 2013
HP ProLiant DL360p Generation 8 (Gen8)
Bus
Width*
x8
x16
HP Smart Array P420i/ZM (RAID 0/1/1+0)
HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
HP Smart Array P420i/2GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
HP Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
HP Smart Array P420i/ZM (RAID 0/1/1+0)
Connector Form Factor
Width
x8 Low profile slot Activated when
x16 Full-height, half-
length slot
Notes
installed with
processor 1
Activated when
installed with
processor 1
Page 6