HP ProLiant DL360p Specification page 32

QuickSpecs
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Factory Integratable Options
HP Rack Kits
HP 750W Common Slot 277VAC Hot Plug Power Supply Kit
NOTE: Option Kits for AC power supplies include the power supply and one PDU IEC
cable.
NOTE: HP ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs). For a full list of optional HP power cords please go to
www.hp.com/products/powercords
NOTE: Power Specification and Technical Content for supported power supplies can be
found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please
take a moment to review the installation documentation that comes with the server to
help you with the installation of your Gen8 server.
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the
server. Customers have the option to purchase their server without a rail kit.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 1U Small Form Factor Easy Install Rail Kit
NOTE: For SFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the
rails are installed the server is aligned with the rails and slid into the rack. The HP 1U
Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 1U Large Form Factor Easy Install Rail Kit
NOTE: For LFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the
rails are installed the server is aligned with the rails and slid into the rack. The HP 1U
Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 1U Cable Management Arm for Easy Install Rail Kit
NOTE: Supports Easy Install rail kits only
HP 1U FIO Friction Rail Kit
NOTE: Kit contains non-telescoping friction rails which do not allow for in rack
serviceability. The HP 1U Gen8 Cable Management Arm is not available when using
Friction Rails.
Caution: HP recommends that a minimum of two people is required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For SFF models.
DA - 14211 Worldwide — Version 47 — December 13, 2013
HP ProLiant DL360p Generation 8 (Gen8)
717364-B21
734807-B21
734809-B21
734811-B21
663200-B21
663201-B21
Page 32