Control Panel Features5; Profile Models - GE EDW4000 Technical Service Manual

Profile Models

Throughout this manual, features and appearance may vary from your model.
Control Settings
Status Indicator Lights
1
The Status display tells you what's happening while the dishwasher is in operation and may flash,
indicating a malfunction (see page 6). The lights will come ON indicating the sequence of
operation the dishwasher is in.
SENSING Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water.
WASHING Displayed during prewash and main wash periods.
RINSING Displayed during rinse periods.
DRYING Displayed during HEATED DRY .
SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.
Time Remaining Display
2
Displays the minutes remaining until the cycle is complete. The display may adjust the remaining
time while the Sensing light is on.
Selections
3
The light above the selected pad will be ON to indicate which WASH CYCLE has been selected.
ANTI-BACTERIA Heavy 10.0 gal., 93 min.
Control Panel Features
1
3
The dishwasher will adjust the selected cycle to achieve optimal performance.
CLEAN Displayed when a wash cycle is complete. The light will remain ON until door is opened.
(on some models)
Medium 8.6 gal., 90 min.
Light 7.2 gal., 90 min.
This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle
length will vary depending on the temperature of your inlet water.
NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is
interrupted during or after the main wash portion or if the incoming water temperature is so low
that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In
these cases, the sanitized light will not illuminate at the end of the cycle.
NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.
6
5 4
8
– 4 –
TIME REMAINING
2