Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4.
Repeat Step 2 and Step 3 to add another WPS client to your network.
Setup Menu
Select Advanced > Setup to display the Setup menu. The following selections are available:
•
Internet Setup. Access the same Internet Setup screen that you can access from the
dashboard on the Basic Home screen. See
•
Wireless Setup. Access the same Wireless Settings screen that you can access from
the dashboard on the Basic Home screen. See
•
Guest Network. Access the same Guest Network screen that you can access from the
dashboard on the Basic Home screen. See
•
WAN Setup. Internet (WAN) setup. See
•
LAN Setup. Local area network (LAN) setup. See
•
QoS Setup. Quality of Service (QoS) setup. See
page 40.
N900 Wireless Dual Band Gigabit Router WNDR4500v2
NETGEAR genie Advanced Home
Internet Setup
on page 21.
Basic Wireless Settings
Guest Networks
on page 28.
WAN Setup
on page 34.
LAN Setup
Quality of Service (QoS) Setup
33
on the front of
on page 25.
on page 37.
on