NETGEAR N300 User Manual page 15

To cable the modem router:

1. Connect the ADSL.
a. Install an ADSL microfilter between the phone line and the phone.
b. Connect the ADSL port of the modem router to the ADSL port of the microfilter
c. Use an ADSL microfilter for every phone line in the house if your modem router and
telephone connect to the same phone line.
2. Add power to the modem router.
a. Connect the power adapter to the router and plug the power adapter into an outlet.
b. Wait for the WiFi LED on the front panel to turn on. If none of the LEDs on the front
panel are on, press the On/Off button on the rear panel of the modem router.
3. Connect the computer.
N300 Wireless ADSL2+ Modem Router DGN2200v3
2
Hardware Setup
15