Ford Econoline E-150 Owner's Manual page 111

110
To install the seat:
2. Pull the seat latch handle downward to lock the seat in position.
3. Make sure the safety belt is not twisted, then insert the safety belt
tongue into the detachable anchor until you hear a click and feel the
latch engage.
Rear Bench Seat
WARNING: Always latch the vehicle seat to the floor, whether
the seat is occupied or empty. If not latched, the seat may cause
injury during a sudden stop.
WARNING: Do not hang or attach any cargo to the release
straps of the rear bench seats. Doing so could cause the release
straps to inadvertently unlatch the rear bench seat. If not latched, the
seat may cause serious injury during a sudden stop.
To remove the seats:
2. Find the clip attached near the end of the lap belt.
2013 Econoline (eco)
Owners Guide gf, 2nd Printing, November 2012
USA (fus)
Seats
1. Position the seat to the floor
mount.
1. Disengage the lap and shoulder
belt from the seat by inserting a key
or small screwdriver into the slot in
the detachable anchor and lifting
upward (2nd row passenger side
only).