Inserting Tape Cartridges Into A Magazine - Fujitsu ETERNUS LT20 S2 Installing, Starting Up And Maintaining

Operating the LTO Library
4.3.1

Inserting Tape Cartridges into a Magazine

1. Unlock the magazines and remove them from the library:
Ê Use the OCP, see
the OCP" on page
Ê Use the RMU, see
the RMU" on page 47
2. Insert cartridges in the magazines
3. Put the full magazines back to the tape library (see figure 24)
Figure 24: Insert magazines
ETERNUS LT20 S2
section "Removing and Replacing a Magazine Using
46, or
section "Removing and Replacing a Magazine Using
Magazines
45