Ford Econoline E-150 Owner's Manual page 229

228
Replacing High-Mount Brake Lamp Bulbs
On vehicles without a rear headliner, the interior cargo lamp (if
equipped) must be removed from under the high-mount brake lamp
assembly located inside the vehicle. Then, do the following:
To install the new bulb, follow the removal procedure in reverse order.
Replacing License Plate Lamp Bulbs
To install the new bulb, follow the removal procedures in reverse order.
2013 Econoline (eco)
Owners Guide gf, 3rd Printing, May 2013
USA (fus)
Maintenance
1. Remove the two screws from the
high-mount brake lamp assembly
and lift the lamp from the vehicle.
2. Remove the bulb socket from the
lamp assembly by turning it
counterclockwise.
3. Carefully pull the bulb straight
out of the socket.
1. Turn the headlamp switch to the
off position.
2. Remove the two screws and the
license plate lamp assembly from
the rear door.
3. Remove bulb socket from lamp
assembly by turning it
counterclockwise.
4. Pull the bulb out from socket and
push in the new bulb.