HP SL2500 Specification page 6

QuickSpecs
Standard Features
Maximum Internal
Storage
Interfaces
Industry Standard
Compliance
Graphics
Server Power Cords
LFF 3.5" Hot Plug SATA
LFF 3.5" Hot Plug SAS
SFF 2.5" Hot Plug SATA
SFF 2.5" Hot Plug SAS
NOTE: To support HP hard drives exceeding 2.2 TB, a HP Smart Array Controller is required.
NOTE: Max Ambient Temperature supported for the product is 30C for all configurations up to 8 LFF or 24
SFF. For customers who requires >8 LFF support, the max ambient temperature supported will be 25C.
NOTE: Support for 12 LFF hard drives is available for special large volume configurations. Please contact
your HP representative for details.
Serial
Network RJ-45 (Ethernet) 2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant iLO4)
Graphics
Management
Health LED
Power
UID
USB
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, DCMI 1.0. SMASH CLP compliant
Integrated Matrox Graphics G200e, 32MB Standard
16 bit color: maximum resolution of 1600 x 1200
32 bit color: maximum resolution of 1280 x 1024
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: The HP ProLiant SL2500 Scalable System server is primarily connected to PDU's in data center racks
so they ship standard with only a PDU power cord (416151-B21).
NOTE: If customers require a power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix:
DA - 14656 North America — Version 6 — December 9, 2013
48.0TB
48.0TB
24.0TB
24.0TB
2
1
1 HP ProLiant iLO4
2 (1 front and 1 rear) per server node
2 (1 front and 1 rear) per server node
1 rear per server node and 1 upfront system UID
2 at rear
http://www.hp.com/go/powercordmatrix
HP SL2500 Scalable System
12 x 4TB
12 x 4TB
24 x 1TB
24 x 1TB
Page 6