Pre-Configured Models; Base Models - HP ProLiant DL320e Specification

QuickSpecs

Pre-configured Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: Maximum speed supported depends on the CPU installed. Entry model will support maximum speed of 1600 MHz.
Please see Memory Population Table or the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard
drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8
Hard Drive Blank Kit.

Base Models

HP ProLiant DL320e Gen8
v2 G3220 1P 2GB-U NHP 2
LFF 300W PS Server
743490-001
HP ProLiant DL320e Gen8
v2 E3-1220v3 1P 4GB-U
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive Bay
PCI-Express Slots
Power Supply
Fans
Management
Form Factor
Warranty
Processor(s)
DA - 14563 North America — Version 8 — December 13, 2013
HP ProLiant DL320e Generation 8 (Gen8) v2
(1) Intel® Pentium® G3220 (3.0 GHz/2-core/3MB/54W) Processor
8MB (1x8MB) Level3
2GB (1 x 4GB) Unbuffered DIMMs PC3-12800E (1600MHz)
HP Ethernet 1Gb 2-port NC332i Adapter
HP Dynamic Smart Array B120i Controller
NOTE: B120i has the following performance with regards to drive speed:
6Gb/s - in 2LFF and 4SFF only with port 0 & 1 installed; 3Gb/s - in 4SFF with
more than 2 drives installed. For full 6 Gb.0/s speed a stand up card/smart
array controller must be used.
NOTE: B120i supports RAID 0/1/10 only. It does not have FBWC support so
cannot support advanced RAID (5 onwards). For FBWC, a standup Smart Array
Controller card must be configured.
None ship standard
2 bay LFF Non Hot Plug Drive Cage; includes 2LFF Hard Drive blanks
None ships standard
1 PCIe3 x16 and 1 PCIe3 x8
300 Watts Non-Hot Plug, Non redundant Power Supply
NOTE: The 300 Watts Non-Hot Plug Non redundant Power Supply is rated at
80% efficiency.
2 front fan assemblies and 1 center fan assembly ship standard, non-
redundant
HP iLO Management Engine (standard)
Optional: HP iLO Essentials or HP Insight Control
1U
Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support
with next business day response.
NOTE: No rail kits are included with the server. They must be ordered
separately.
(1) Intel® Xeon® E3-1220v3 (3.1GHz/4-core/8MB/80W, HT) Processor
Page 16