Hp 22-N-1 Media Card Reader - HP Compaq Elite 8300 Specification

QuickSpecs
Technical Specifications - Removable Storage
Power
Audio output
Environmental (all conditions
non-condensing)

HP 22-n-1 Media Card Reader

USB Interface
Advance protocol support
Source
DC Power Requirement
DC Current
Total Drive Power
(standby mode)
Line-Out
Signal-to-Noise Ratio
Channel Separation
Temperature
Relative Humidity
Maximum Wet Bulb
Temperature (operating)
USB 2.0 High-speed interface
Note:
Requires the USB cable to be connected to the internal USB 2.0 port or a USB 2.0 PCI card.
Supports hardware ECC (Error Correction Code) function
Supports hardware CRC (Cyclic Redundancy Check) function
Supports MS 4-bit parallel transfer mode
Supports MS-PRO 4-bit parallel transfer mode
Supports MS PRO-HG Duo 4-bit parallel transfer mode
Supports SD 4-bit parallel transfer mode
Supports high-speed 50Mhz SD 4-bit card (version 2.0)
Supports high-speed 52Mhz MultiMediaCard 8-bit card (version 4.2)
Supports CF v4.0 with PIO mode 6 and Ultra DMA mode
CompactFlash Type I
CompactFlash Type II
Microdrive
MultiMediaCard
Reduced Size MultiMediaCard (RS MultiMediaCard)
MultiMediaCard 4.2 (MultiMediaCard Plus, including MultiMediaCard Plus HC)
DA - 14268 North America — Version 41 — November 22, 2013
HP Compaq Elite 8300 Business PC
Four-pin, DC power receptacle
5 VDC ± 5%-100 mV ripple p-p
5 VDC - <1000 mA typical, < 1600 mA maximum
< 2.5 Watt
0.7 VRMS
74 dB
65 dB
41° to 122° F (5° to 50° C)
5% to 85%
86° F (30° C)
Page 46