MULTIQUIP js36h55 Operation And Parts Manual page 25

maneuvering the Trowel
1. Get into the operator's position behind the handle. With
a secure foothold and a firm grasp on the handle, slowly
increase the engine speed until the desired blade speed
is obtained.
2. Figure 31 below illustrates a typical walk-behind trowel
application. Practice maneuvering the trowel. The trick
is to let the trowel do the work.
CaUTION
NEVER place your feet or hands inside the guard rings
while starting or operating this equipment.
jS36 SeRIeS WaLK-BeHINDTROWeL • OpeRaTION aND paRTS maNUaL — Rev. #4 (11/01/13) — page 25
3. Continue to practice maneuvering the trowel. Try to
Figure 31. maneuvering the Trowel
aLwayS keep clear of rotating or moving parts while
operating this equipment.
practice as if you were finishing a slab of concrete.
Practice edging and covering a large area.
Remember a good finishing technique is to work
backwards. Be careful when moving backwards so
that hazards can be avoided. The best way to get
accustomed to the trowel is repeated use.
CaUTION
operation