Panasonic WV-CL930 Operating Instructions Manual page 46

AUTO (default): Adjusts the back focus function automatically and corrects out of focus when
switching between color and black-and-white images.
PRESET: Performs the preset movement to each specified back focus position when switching
between color and black-and-white images. The preset position is the back focus position
specified last time, which was automatically memorized for each of color images and
black-and-white images.
FIX: Fixes the position after adjusting the back focus either automatically (ABF) or manually.
Note:
"AUTO" of "C/L
FIX".
Step 4
Moving the cursor to "SETUP-SW LOCK" and selecting "ON" allow users to disable the back
focus adjustment with the operation buttons. ( page 17)
Important:
• The following are recommendation for back focus setting in accordance with subjects.
For such case
(subject conditions)
• Normal subject
• Frequently moving subj.
• Subj. with low illuminance
• Too bright or reflective subj.
• Subj. through a window
• Place where the lens easily
becomes dirty
• Subj. with less contrast such
as white wall
• Subj. with remarkable depth
• Subj. with heavy flicker
• Subj. with horizontally paral-
lel lines such as a shutter
• We shall not responsible for any inconvenience, loss, or damage caused by the settings or
results of the back focus function.
46
←→
B/W" is available when "SENS UP" is set to "OFF", "X2 AUTO", or "X2
Back focus adjustment
"ABF"
Fine adjustment with "MANU-
AL-ADJ" after "ABF" or "MANU-
AL-ADJ"
Select this (recommendation)
"C/L ←→ B/W" switching
"AUTO"
"PRESET" or "FIX"