Specifications - Panasonic EX-F70 SERIES Ordering Manual

855
Leak Detection Sensor
OPTIONS
FIBER
SENSORS
LASER
SENSORS
Designation Model No.
PHOTO-
ELECTRIC
SENSORS
MS-DIN-3
Unit mounting bracket
MICRO
PHOTO-
ELECTRIC
Accessories
SENSORS
AREA
• MS-EX-F7-1 • MS-EX-F7-2
SENSORS
SUS mounting PVC mounting bracket
bracket for adhesive fixing
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
• MS-EX-F7-3
SENSORS
PVC mounting bracket
PARTICULAR
USE for two-point fixing
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS

SPECIFICATIONS

WIRE-SAVING
SYSTEMS
Sensors
MEASURE-
MENT
SENSORS
STATIC
Type
CONTROL
DEVICES
NPN output
ENDOSCOPE
Item PNP output
LASER
MARKERS
Sensing object
PLC /
TERMINALS
Supply voltage
HUMAN
Current consumption
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
Output
FA
COMPONENTS
MACHINE
VISION
Utilization category
SYSTEMS
Output operation
UV
CURING
Short-circuit protection
SYSTEMS
Response time
FAULT indicator
NORMAL indicator
Selection
Guide
Pollution degree
Wafer
Detection
Protection
Liquid Leak
Detection
Ambient temperature
Liquid Level
Detection
Ambient humidity
Water
Ambient illuminance
Detection
Color Mark
Emitting element
Detection
Hot Melt Glue
Material
Detection
Cable
Ultrasonic
Cable extension
Small / Slim
Object Detection
Weight
Obstacle
Detection
Other
Products
Accessories
SQ4
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C
2) Highly viscous liquid may not be detected stably.
EX-F70/
EX-F60
3) Fluorinert is the world wide trademark of 3M.
TM
4) The agents mentioned above are examples. For details, please contact our office.
5) Liquid being detected should also be kept within the rated ambient temperature range.
6) PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
7) The mounting bracket for EX-F71(-PN) is not interchangeable with that of EX-F72(-PN) due to the different sensitivity settings of each sensor.
EX-F70 EX-F60
SERIES
Description
Mounting bracket for EX-FC1
• MS-EX-F6-1 • MS-EX-F6-2
PFA mounting PVC mounting
bracket bracket
General purpose
SUS mounting bracket type PVC mounting bracket type PFA mounting bracket type PVC mounting bracket type
EX-F71
EX-F71-PN
Water, Fluorinert (Note 2, 3)
TM
10 mA or less (PNP output type: 15 mA or less)
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 1.0 V or less (at 50 mA sink current)
0.4 V or less (at 16 mA sink current)
In normal state: ON, When leak detected or the sensor is mounted improperly: OFF
Red LED (lights up when the leak liquid is detected, or the sensor is mounted improperly)
Green LED (lights up when the sensor is mounted properly)
–10 to +60 °C +14 to +140 °F (No dew condensation or icing allowed), Storage: –20 to +70 °C
Enclosure: Polypropylene
0.1 mm 3-core PVC cabtyre cable, 2 m
2
Extension up to total 50 m
Net weight: 25 g approx.
MS-EX-F7-1 MS-EX-F7-2, MS-EX-F7-3
(SUS mounting bracket) (PVC mounting bracket) (Note 7):1 pc.
(Note 7): 1 pc. each for two-point-fixing and adhesive-fixing
SERIES
• SL-CP1
(Snap male connector)
10 pcs. per set
EX-F72
EX-F72-PN EX-F61-PN
Agent, such as Sulfuric acid, Hydrochloric acid,
Phosphoric acid or Ammonia etc. (Note 2, 4, 6)
12 to 24 V DC ±10 % Ripple P-P 10 % or less
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.0 V or less (at 50 mA source current)
DC-12 or DC-13
Incorporated
50 ms or less
3 (Industrial environment)
IP67 (IEC)
35 to 85 % RH, Storage: 35 to 85 % RH
Incandescent light: 1,000 ℓx at the light-receiving face
Infrared LED (non-modulated)
6.562 ft long 0.1 mm
164.042 ft is possible with 0.3 mm
MS-EX-F6-1
(PFA mounting bracket): 1 pc.
Unit mounting bracket
• MS-DIN-3
• SC-PK • MS-SL-2
(Connector end caps) Unit mounting
base
8 pcs. per set
Connector end caps
SC-PK
Chemical-resistant
EX-F61 EX-F62
EX-F62-PN
15 mA or less
0.4 V or less (at 16 mA source current)
– 4 to +158 °F
Enclosure: PFA
3-core PFA cabtyre cable, 3 m 9.843 ft
2
, or more, cable.
2
Net weight: 60 g approx.
MS-EX-F6-2
(PVC mounting bracket): 1 pc.
+68 °F.
(Note 5)
long