Panasonic EX-F70 SERIES Ordering Manual

853
Leak Detection Sensor
EX-F70
FIBER Related Information
SENSORS
LASER
SENSORS
PHOTOELECTRIC
SENSORS
MICRO
PHOTOELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASUREMENT
SENSORS
STATIC CONTROL
DEVICES
ENDOSCOPE
High-speed detection even a little liquid leak
LASER
MARKERS
PLC /
EX-F70 SERIES
TERMINALS
HUMAN MACHINE
Reliable detection
INTERFACES
ENERGY CONSUMPTION
The unique effect of
VISUALIZATION
COMPONENTS
capillarity enables reliable
detection of small leaks
FA COMPONENTS
and viscous liquids.
MACHINE VISION
SYSTEMS
UV CURING
New type of detection method
SYSTEMS
When a leak occurs, the beam from the beam-emitting part scatters
through the leaked liquid and is not transmitted to the beam-receiving part.
Selection
<When leakage occurs>
Guide
Beam-emitting part Beam-receiving part
Wafer Detection
Liquid Leak
Detection
Liquid Level
Detection
Leaked
Water Detection
liquid
Color Mark
Detection
Leakage pan
Hot Melt Glue
Detection
The beam from the beam-emitting part
Ultrasonic scatters through the leaked liquid and is
not transmitted to the beam-receiving part.
Small /
Slim Object Detection
Compact, space-saving
Obstacle
Detection
Other Products
This slim (10 mm
side-mounting sensor is
especially good for use
SQ4
in confined spaces.
EX-F70/
EX-F60
Amplifier Built-in
SERIES
■
General terms and conditions ........... F-17
■
General precautions ..................... P.1405
panasonic-electric-works.net/sunx
Capillarity effect
Liquid
Leakage pan Leakage pan
<When there is no leakage>
Beam-emitting part Beam-receiving part
Sensing
surface
Leakage pan
The beam from the beam-emitting part
reflects off of the surface of the sensor and
is transmitted to the beam-receiving part.
0.394 in)
SUS mounting bracket type PVC mounting bracket type
EX-F71 EX-F72
EX-F60
■
Sensor selection guide ................. P.831~
■
Korea's S-mark ............................. P.1410
No need for sensitivity adjustment
No need for sensitivity adjustment with adjuster, so initial
Sensor body
mounting is easy.
Easy operation check
This sensor is equipped with a NORMAL indicator (green)
which lights up when mounting correctly, and a FAULT
indicator (red) which lights up when sensing the leaked liquid
or when mounted incorrectly (forgetting to mount exclusive
mounting bracket). So, the operation can be checked easily.
Safe design
If the sensor is not mounted correctly, if the cable is
broken or disconnected, or if the sensor is not operating
Sensing
correctly, the output is the same as when the beam is
surface
not received (LEAK). Design deals with human errors
such as, forgetting to mount, etc.
Easy installation & reset
Facilitates easy installation: the SUS mounting bracket
type can be installed using only a single screw and the
PVC mounting bracket type can be installed using only
two screws or an adhesive. No component replacement
10 mm
0.394 in
required for resetting after leak detection. The simple
approx.
shape makes it easy to wipe off the leaked liquid.
PVC mounting bracket available
A mounting bracket made of PVC (polyvinyl chloride) is
available. This mounting bracket can be used normally in
environments that would corrode normal metal brackets.
SERIES
Conforming to
Recognition
EMC Directive
Certified
(Excluding PNP output type)
EX-F72□