Peration; Charge /I N Use Indicator; Ringer; Volume - GE 21025/26 User Manual

3. Use the touch-tone pad on your handset to enter 1YES or 2NO , or use
the cid/vol (
2NO is the default setting.
NOTE: If you choose YES all settings in the programmable menu return to the
factory default settings.
NOTE: Press the exit/answerer button once to keep the previous setting and
return to the main menu.
4. Press the mute/program button to save your selection, and return to the
main menu. If you select YES, DEFAULT SETTING YES displays for two
seconds.
O

PERATION

C /I U
HARGE N
The charge/in use indicator is lit when the handset is correctly seated in
the cradle and is charging or when the phone is on. The indicator flashes
when the base pages the handset, or when you receive an incoming call.
R V
INGER OLUME
1. Make sure the handset is OFF (not in TALK mode),
2. Press the ringer button, and the display shows either one of the
following messages depending if the ringer is turned OFF or ON:
20
or ) button on your handset to scroll to your selection.
DEFAULT SETTING
DEFAULT SETTING
HANDSET DISPLAY
I
SE NDICATOR
C
ONTROL
1 YES 2 NO
YES