Print Settings; Setup Menu - Lexmark CX510 User Manual

Understanding the printer menus
Use
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Blank Pages
Do Not Print
Print

Print Settings

Setup menu

Use
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Print Area
Normal
Fit to Page
Whole Page
Printer Usage
Max Yield
Max Speed
Black Only Mode
On
Off
To
Specify the paper source for separator sheets.
Note: Tray 1 is the factory default setting.
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
To
Set the default printer language.
Notes:
•
PS Emulation is the factory default printer language.
•
Setting a printer language as the default does not prevent a software
program from sending print jobs that use another printer language.
Specify that print jobs be removed from the print queue if they require unavailable
printer options or custom settings. They are stored in a separate print queue, so
other jobs print normally. When the missing information or options are obtained,
the stored jobs print.
Notes:
•
Off is the factory default setting.
• This menu item appears only when a formatted, working printer hard disk is
installed. This requirement ensures that stored jobs are not deleted if the
printer loses power.
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. When attempting to print data in the
non‑printable area defined by the Normal setting, the printer clips the image
at the boundary.
•
Whole Page allows the image to be moved into the non‑printable area
defined by the Normal setting. Whole Page only affects pages printed using a
PCL 5e interpreter. This setting has no effect on pages printed using the
PCL XL or PostScript interpreter.
Set the printer for a faster print speed or for a higher toner yield.
Note: Max Yield is the factory default setting.
Set the printer to print text and graphics using only the black toner cartridge.
Note: Off is the factory default setting.
188