Hyundai Santa Fe Owner's Manual page 48

To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1. Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
ing the restraint manufacturer's
instructions. Be sure the seat belt web-
bing is not twisted.
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct "click"
sound.
Position the release button so that it is
easy to access in case of an emergency.
OEN036101
3. Pull the shoulder portion of the seat
belt all the way out. When the shoulder
portion of the seat belt is fully extend-
ed, it will shift the retractor to the "Auto
Lock" (child restraint) mode.
Safety system of your vehicle
OEN036102
4. Slowly allow the shoulder portion of
the seat belt to retract and listen for an
audible "clicking" or "ratcheting" sound.
This indicates that the retractor is in
the "Auto Lock" mode. If no distinct
sound is heard, repeat steps 3 and 4.
OEN036103
3 31