Attribute Threshold (for comparison with Attribute
Values from 00h to FFh)
00h – "always passing" threshold value to be used
for code test purposes
01h – minimum value for normal operation
FDh – maximum value for normal operation
FEh – invalid for threshold value
FFh – "always failing" threshold value to be
used for code test purposes
Reserved (00h)
Total Bytes
Figure 115. Individual Threshold Data Structure
13.32.3.3 Attribute ID Numbers
Attribute ID Numbers supported by the device are the same as Attribute Values Data Structures.
13.32.3.4 Attribute Threshold
These values are preset at the factory and are not meant to be changeable. However, the host might use
the "S.M.A.R.T. Write Attribute Threshold" subcommand to override these preset values in the Threshold
sectors.
13.32.3.5 Data Structure Checksum
The Data Structure Checksum is the 2's compliment of the result of a simple 8-bit addition of the first 511
bytes in the data structure.
Travelstar 32GH/30GT/20GN hard disk drive specifications
170
1
01h
binary
10
02h
binary
12