H
Input Parameters From The Device
Sector Number
Cylinder High/Low
H
Error
Explanation for descriptor
Descriptor : 00h
Byte
0
1
2
3
4
5
:
:
N*2
N*2+1
N*2+2
N*2+3
:
:
510
511
Descriptor : 00h—Format sector as good sector
Figure 76. Format track data field format
This indicates the head number of the track to be formatted. (L = 0)
In LBA mode this register specifies that LBA address bits 24–27 are to be
formatted. (L = 1)
In LBA mode this register specifies the current LBA address bits as 0–7 (L = 1).
In LBA mode this register specifies the current LBA address bits as 8–15 (Low)
and bits 16–23 (High).
In LBA mode this register specifies the current LBA address bits as 24–27 (L = 1).
This indicates the Error Register. An Abort error (ABT = 1) will be returned under
the following conditions:
! The descriptor value does not match the certain value (except 00h).
In LBA mode this command formats a single logical track including the specified
LBA.
This indicates the sector of data will be initialized to 00h.
Data
xxh
descriptor value for sector number 00h
00h
sector number
xxh
descriptor value for sector number 01h
01h
sector number
xxh
descriptor value for sector number 02h
02h
sector number
:
:
xxh
descriptor value for sector number N
N
sector number (last sector for the track)
remainder of buffer filled with 00h
00h
00h
:
:
00h
00h
Travelstar 32GH/30GT/20GN hard disk drive specifications
Description
112