InSinkErator Badger 15ss Specifications

Dimensions
Dishwasher
Connection
12 / "
5
8
5"
6 / "
3
4
* Distance from bottom of sink to center line of disposer outlet.
Add 1/2" when stainless steel sinks are used.
** Length of tailpipe from center line of disposer outlet to end of tailpipe.
NOTE: Plumb waste line to prevent standing water in disposer motor housing.
Job Specifications
H723-11M-64- 10
Food Waste Disposers
15
SS
Submittal Sheet
Our Badger
power and a longer warranty than the
Badger
This model also offers the following
features and benefits:
• 3/4 Horsepower Heavy Duty Motor
(Quiet Dura-Drive
• 3-Year We Come To You
Parts And Labor Service Warranty
• Stainless Steel Grind Components
• Polished stainless steel flange with
1-piece stainless steel stopper
• Space-Saving Compact Design
Sample Specification
Drain
Food Waste Disposer(s) shall be
6"
InSinkErator Badger
feed, with 3/4 H.P. motor, stainless
steel grind components with two
stainless steel 360° swivel lugs.
4"
Self-service wrench.
Warranty:
3- Year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
Booklet packed with each unit.
1-800-558-5700
www.insinkerator.com
15ss model provides more
®
® 5 or Badger ® 1.
® Induction Motor)
In-Home
®
15ss, continuous
®
Food waste disposers provide an environmentally responsible alternative to
transporting food waste to landfills. And they can help reduce greenhouse gas
emissions. At capable wastewater treatment plants, food waste can be converted
to biosolids and used as fertilizer. Capable plants can also capture methane gas
and recycle it as an energy source. (Check the plant in your area.)
Printed in U.S.A. © 2012 InSinkErator, a business unit of Emerson Electric Co. All Rights Reserved.

Specifications

Type of Feed Continuous
On/Off Control Wall Switch
Motor Single Phase
HP 3/4
Volts 120
HZ 60
RPM 1725
Amp. (Avg. Load) 9.5
Time Rating Intermittent
Lubrication Permanently
Lubricated Upper &
Lower Bearings
Shipping
Weight (Approx.) 15 lbs. 8 oz.
Unit Finish Black
Overall Height 12-5/8"
Grind Chamber
Capacity 26 oz.
Motor Manual Reset
Protection Overload
Average Approx. 1 Gallon per
Water Usage Person Per Day
Average
Electrical Usage 3-4 KWh per Year
Drain 1-1/2" Cushioned
Connection Slip Joint
Dishwasher
Drain Connection Yes
The Emerson logo is a trademark and service mark of
Emerson Electric Co. The mounting collar configuration
is a trademark of Emerson Electric Co.
InSinkErator may make improvements and/or changes
in the specifications at any time, in its sole discretion,
without notice or obligation and further reserves the
right to change or discontinue models.