Table of Contents
Advertisement
Chapter 3. Operation
PORT UTIL (Port Utility)
3)UTIL
22
Port Utility, a submenu of the TSU 100/600 Main menu
item Utilities (UTIL) displays the current software
information for each port installed in the unit. This
information is required when requesting assistance
from ADTRAN Customer Service or when updates are
needed.
When Port Utility is displayed, place the cursor on it
and press Enter to display the first available port. See
Figure 3-6.
1)ENTER PASSCODE
2)TIME/DATE
3)FACTORY RESTORE
4)REINIT UNIT
5)UNIT ID
6)SOFTWARE REV
7)PORT UTIL
Display 1.1 FXS+ (scroll to display if necessary), and
press Enter. The unit displays the option module
name and the software version installed.
The submenu Port Utility contains a second option,
2)CMD Mode, for the FXS+ module. This option is
reserved for factory use only.
Press Cancel to exit or select another port.
FXS+ Dual Voice Option Module
1)SW REVISION
1.1 FXS+
2)COMMAND MODE
Port Utility Submenus
Figure 3-6
61200.080L1-1
Advertisement
Table of Contents
