PORT CONFIG (Port Configuration)
2)CONFIG
61200.080L1-1
Port Configuration, a submenu of TSU 100/600 main
menu item Configuration, is used to configure the FXS+
option module. The following submenu items are used
to configure the parameters:
• MODE
• RX LVL (TLP)
• TX LVL (TLP)
• FAULT RESP
• TANDM OPTIONS
- Supervision
- Dial Tone
- Loop Rev Bat
- Ring Back
When Port Configuration is displayed, place the cursor
on it and press Enter to activate. Scroll to display the
port to be configured and activate with Enter. See
Figure 3-5.
The unit displays the first of five submenu items. Table
3-A identifies the available selections for Port Configura-
tion. Continue with standard operating procedures.
7)PORT CONFIG
FXS+ Dual Voice Option Module
Chapter 3. Operation
1)MODE
2)RX LVL (TLP)
1.2 FXS+
3)TX LVL (TLP)
4)FAULT RESP
5)TANDM OPTIONS
Port Configuration Submenus
Figure 3-5
17