Ford Edge Owner's Manual page 61

2013
Hide thumbs Also See for Edge:
Table of Contents

Advertisement

60
Keys and Remote Control
5. Snap the battery cover back onto the transmitter and install the
backup key.
Memory Feature (If Equipped)
This feature allows you to recall the driver seat and power mirrors
memory positions.
Press the unlock button on the remote control or activate intelligent
access to recall memory. The seat and power mirrors automatically move
to the memory position. The mirrors will move to the programmed
position and the seat will move to the easy entry position. The seat will
move to the final position when the ignition is switched out of off (if
easy entry feature is enabled).
Programming Memory to the Transmitter
To activate this feature:
1. Move the memory features to the desired positions using the
associated controls.
1
3. Within three seconds press the lock button on the remote control.
4. Wait 10 seconds, then press the unlock button on the remote control.
5. Repeat this procedure for memory button 2 and another transmitter if
desired.
Deactivating Memory from the Transmitter
To deactivate this feature:
1. Press and hold either the 1 or 2 button for five seconds. A tone will
sound when the memory store is done. Continue to hold until a second
tone is heard.
2. Within three seconds press the unlock button on the remote control .
3. Repeat this procedure for each additional transmitter if desired.
2013 Edge (edg)
Owners Guide gf, 3rd Printing
USA (fus)
2. Press and hold button 1 for five
seconds. A tone will sound
confirming memory position has
2
been set. Continue to hold until a
second tone is heard after five
seconds.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 edge

Table of Contents