Configuring Wireless Security; Wired Equivalent Privacy (Wep) - EnGenius ENS500EXT User Manual

B N S
ASIC ETWORK ETTINGS

4.4.2 Configuring Wireless Security

The Wireless Security Settings section lets you configure the ENS500EXT's security modes: WEP, WPA-PSK, WPA2-PSK, WPA-
PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly recommend you use WPA2-PSK.

Wired Equivalent Privacy (WEP)

Security Mode Select WEP from the drop-down list to begin the
configuration.
Auth Type Select Open System or Shared.
Input Type Select an input type of Hex or ASCII.
Key Length Level of WEP encryption applied to all WEP keys.
Select a 64/128/152-bit password lengths.
Default Key Specify which of the four WEP keys the
ENS500EXT uses as its default.
Key1 - Key4 Specify a password for the security key index. For
security, each typed character is masked by a dot.
Click Save to save the changes or Cancel to cancel and return
previous settings.
Note:
802.11n does not allow WEP/WPA-PSK TKIP/WPA2-PSK TKIP security mode. The connection mode will change from 802.11n to
802.11a.
4-28
C W S
ONFIGURING IRELESS ECURITY