Configuring Ip Settings - EnGenius ENS200EXT User Manual

B N S
ASIC ETWORK ETTINGS

4.2.2 Configuring IP Settings

Configure the ENS200EXT LAN settings for the ENS200EXT using a static or dynamic IP address.
IP Network Setting Configure the network connection type using
either a static IP or dynamic IP.
IP Address Enter the LAN IP address of the ENS200EXT.
Subnet Mask Enter the subnet mask of the ENS200EXT.
Default Gateway Enter the default gateway of the ENS200EXT.
Primary DNS Enter the primary DNS address of the
ENS200EXT.
Secondary DNS Enter the secondary DNS address of the
ENS200EXT.
Use Link-Local Address Click to enable a link-local address for
the device.
IPv6 IP Address Enter the IPv6 LAN IP address of the
ENS200EXT.
IPv6 Subnet Prefix Length
the ENS200EXT.
IPv6 Default Gateway Enter the IPv6 default gateway of the ENS200EXT.
IPv6 Primary DNS Enter the IPv6 primary DNS of the ENS200EXT.
IPv6 Secondary DNS Enter the IPv6 secondary DNS of the ENS200EXT.
Click Apply to save the settings or Cancel to discard changes.
Enter the IPv6 subnet prefix length of
4-10
C IP S
ONFIGURING ETTINGS